Hanafy Mineral Remover No. 1  Volume - 15 mlComposition : magnesium oxide, zinc oxide, water, glycerin, isopropanol.Description:Mineral remover with alkaline pH (7.7). White opaque liquid requiring thorough mixing and shaking before use (using a pigment shaker machine is recommended.)In case of excessive thickening, dilution is allowed using Thinner from Hanafy. Instructions:You should work with a 3 RL needle, in short, dense strokes, evenly passing all the areas necessary for removal. To achieve results, make two full passes over the entire area to be removed. Only preliminary anesthesia is used; secondary anesthesia is not used during the work.After each pass, leave the remover on the skin for 3-5 minutes, then gently wipe with chlorhexidine. After the second pass, you can use a salt activator to enhance the result - either applying it as a mask to the treated area for 5 minutes, or diluting the remover 1 to 1 and making the third pass with lighter movements, as when spraying permanent makeup.Care after the procedure:1 day - do not touch.Starting from the second day, lubricate twice a day with Bepanten or Depanthenol. The remaining restrictions are the same as for PM (do not soak, do not steam, do not sunbathe, do not subject to mechanical damage).Repeated procedure - no earlier than after 6 weeks.