Holley Gen III Hemi EFI w/ 105 mm LS Style Throttle Body - Black Finish

Part #:#26-300-651BK Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake ManifoldFits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic FinishRunner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine ConfigurationsIncludes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel SystemWorks with Gen III Hemi Injectors & Bosch EV-1 Style InjectorsO-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to ReplaceBillet Oil Fill Cap – Attractive Low Profile DesignPositive Crankcase Ventilation (PVC) Ports w/ Adapter FittingsOverall Height: 11.59”Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)Cast-In Pads for Adding Nitrous NozzlesManifold Base – Available Separately for Custom Induction Systems