Hinge Dogs - Festool, Makita, Milwaukee, Kreg, Excel & Triton

Easy Access Track Hinge The Benchdog Hinge Dogs system is a smart solution for anyone working in tight spaces. It allows your guide track to hinge open, giving you effortless access to place or remove your workpiece without having to lift or remove the track entirely. Perfect for setups where your work table sits close to a wall, the Hinge Dog makes working in confined spaces much easier. Designed to work seamlessly with our fence system, it enables the hinge track connector to sit close to your fence while maintaining full functionality and stability. Setting up is simple: when positioning the dogs with your workpiece, tighten the grub screw once the track is seated on the workpiece. This makes setup quick, precise, and hassle-free. The Hinge Dog is available in 95mm and 65mm height versions. We initially introduced the 95mm version, followed by the 65mm option for customers who did not have sufficient clearance beneath their MFT top to accommodate the taller model. The 65mm version can cut material up to 25mm thick, which is more than sufficient for most sheet goods. Compatible with the following tracks Festool, Makita, Milwaukee, Kreg, Excel & Triton Cutting Widths With regards to cutting width on our Ultra MFT Workstation, you can achieve a maximum cross-cut of 600mm on one table; this can be extended if outriggers are attached. Important information - this product is designed for 20mm holes inaccurate holes sizes will cause issues with the dog’s stability. It is advised that you confirm the hole size is no more then 20.08mm before purchasing What you will receive With 65mm Guide Rail Dogs set: Added 10th November 20252 x Hinge Dogs with 65mm dogs & bases2 x M8 Bolts 4 x M6 x 16mm Grub Screws1 x 4mm Hex Key1 x 3mm Hex Key4 x Spare O-Rings4 x Spare White WashersWith 95mm Guide Rail Dogs set:2 x Hinge Dogs with 95mm dogs & bases2 x M8 Bolts 4 x M6 x 16mm Grub Screws1 x 4mm Hex Key1 x 3mm Hex Key4 x Spare O-Rings4 x Spare White Washers Also available for the Mafell/Bosch FSN Systems here Hinge Dog® is a trademark of Benchdogs Ltd. Please note: On our first YouTube video of the Hinge Dogs showed the hinges installed without dogs; this is not correct. Please refer to the later video as above, which accurately shows the correct installation. If your worktop was supplied by us, manufactured prior to this date, additional holes will need to be added. We can supply a 3D-printed jig to help you accurately add the required holes to your existing worktop (bought from us).