94-02 2nd Gen Ram Bolt-On Traction Bar Kit

.ffs-section{border:1px solid #e5e7eb;border-radius:8px;margin:0.75rem 0;background:#fff;overflow:hidden} .ffs-section>summary{cursor:pointer;padding:.8rem 1rem;font-weight:600;list-style:none} .ffs-section>summary::-webkit-details-marker{display:none} .ffs-section[open]>summary{border-bottom:1px solid #e5e7eb;background:#f9fafb} .ffs-content{padding:.9rem 1rem} Please note in the year make model box, your axle type (dana 70 or 80 or AAM) and the length of bar desired. Does Not Include Blocks . Please Note block height, if any, on order. 2nd Gen Ram Bolt-On Traction Bar Kit — Hardcore, heavy-duty, no-rattle traction bars for leaf-spring Rams. Locks down axle wrap and rear-end wander without giving up suspension travel or ground clearance—no welding required. Bar lengths available in 54″, 60″, and 73″ to suit cab/bed and lift setups. Default finish: Wrinkle Black. Custom colors available via surcharge. Key Specs Compatibility: 2nd Gen Ram leaf-spring rear Works great with rear lift blocks. Design: Bolt-on frame & axle brackets; no welding needed. High ground-clearance bracket geometry. Bar Lengths: 54″ (fits all), 60″, or 73″ depending on cab/bed and lift height (longer bars benefit higher lifts). Joints: 1.25″ chromoly heims with misalignment spacers + bushed DOM sleeves at link arms. Finish: Wrinkle Black is the default; custom powder colors available (single/double coat surcharge). Frame Bracket: Inside + outside of frame on a standard width section (H-shaped clamping). Axle Bracket:bolt-on with double overlay plates; utilizes U-bolts. Benefit: Controls axle wrap/hop; plants tires under power in sand, dirt, or pavement; reduces rear-end wander. Choose bar length based on bed/cab and lift height. See diagram in photos for exact fit guidance. What’s Included Pair FFS bolt-on overlay-badge Frame Brackets (Wrinkle Black) Pair FFS Bolt-On Traction Axle Brackets w/ double overlay plates (Wrinkle Black) Link Arms (super heavy-duty tubing) with 1.25″ chromoly heims + misalignment spacers + bushed DOM sleeves Top U-bolt plates (Wrinkle Black) U-bolts per your specifications for the axle bracket Linked separately / optional: 5/8″ U-bolts per spec, additional top U-bolt plates, and lift block (your chosen height). Custom colors available via surcharge. Installation Difficulty: Intermediate (drilling + precise alignment) No Welding: 100% bolt-on using frame clamps and axle U-bolts. Tips: Set ride height, mock up both bars, confirm pinion angle and clearance at full droop/compression, then torque in sequence. Works with Lift Blocks: Increases anti-wrap leverage by forming a strong triangle (bars + block + front half of leaf as an upper arm). Tap Flex Structural Fastener Notes (used in install) Meets Grade 5 ASTM A449 strength/ductility Drill size: 15/32″ Seating torque: 75 ft-lbs In 1/8″ steel: Shear strength ~ 4,773 lbs; Thread pull-out ~ 3,668 lbs (increases with added thickness) Re-torque all hardware after the first 50–100 miles and after any heavy use. Designed to look as good as it works—frame brackets match our front radius long-arm aesthetic; axle brackets look sharp from the rear and preserve clearance. Ask us about FFS Professional Installation services.