Mercedes-Benz M276 Top Mount Intake System

Mercedes-Benz C43 AMG Top Mount Performance Intake - M276 Engine by ModalWorks Built to order - approximately 1 week lead time. The C43 AMG Top Mount Intake System is engineered specifically for the Mercedes-Benz M276 twin-turbo platform to deliver lower intake air temperatures, increased boost efficiency, and measurable real world performance gains all while retaining a fully enclosed factory style design. By eliminating restrictive factory airflow paths, this intake allows the turbochargers to breathe more efficiently, improving pressure ratio and mass airflow. The result is cooler air, higher boost consistency, and faster acceleration without requiring tuning or additional modifications. Key Performance Benefits Reduces intake air temperatures by 7-10°F versus the factory airbox Improves 60-100 mph acceleration by up to 0.4 seconds on factory calibration Increases boost pressure by approximately 2 psi across the powerband Fully enclosed design blocks radiant engine bay heat Installs in minutes using basic hand tools Construction & Design This intake system is manufactured from high performance carbon fiber reinforced polymer, balancing strength, thermal resistance, and weight savings. Side-by-side testing against the OEM airbox demonstrates improved airflow with reduced restriction, allowing the turbos to operate more efficiently under load. Unlike open-element designs that ingest hot under-hood air, this system maintains a sealed intake path to preserve consistent intake temperatures during aggressive driving conditions. CFD-Optimized Airflow Engineering The intake geometry was refined through extensive computational fluid dynamics (CFD) modeling. Multiple iterations were evaluated to: Increase airflow velocity Reduce turbulence and re-circulation Maintain enclosure integrity for thermal control The final design proves that a fully enclosed intake can deliver high airflow and real power gains within the tight confines of the C43 engine bay. Testing & Validation All performance validation was conducted on a completely stock 2017 Mercedes-Benz C43 AMG. Multiple data logs and acceleration tests were performed and averaged under identical conditions. Average intake air temperatures 9°F lower than stock Boost pressure increased by ~2 psi across 60–100 mph runs Improved mass airflow resulting in measurable power gains Lower IAT combined with increased boost efficiency leads directly to higher mass airflow, which is proportional to power output. Dragy Acceleration Results Real-world testing matters more than dyno charts. Using Dragy performance data, 60–100 mph testing was conducted comparing: OEM factory airbox Competing aftermarket intake This top mount intake system Across four averaged runs under the same weather conditions, this intake delivered a 0.4-second improvement over stock, outperforming competing aftermarket options by a significant margin. What’s Included 2 × High-flow performance panel filters 2 × Lower intake funnels (filter-to-turbo) 2 × Upper air guides 2 × MAP sensor wiring harness extenders Vehicle Compatibility Year Model Chassis 2014 C400 W205 2015 C400 W205 2016 C450 W205 2016 C43 AMG W205 2017 C43 AMG W205 2018 C43 AMG W205 2019 C43 AMG W205 2020 C43 AMG W205 Engine: Mercedes-Benz M276 Twin-Turbo