FLYWING Bell 222 Airwolf 470-Class RC Helicopter – 2.4GHz 6CH Scale Military Helicopter with ACE Flight Controller, GPS Positioning & Retractable Landing Gear (RTF)

Product Description:1. The 470-class BELL 222 Airwolf realistic helicopter simulation is a six-channel RC model equipped with a 16V high-power motor and is easy to maintain. Paired with the ACE flight controller featuring omnidirectional positioning technology and the BeiDou positioning system, it can achieve precise hovering. The addition of intelligent return-to-home functionality allows the aircraft to automatically return to the takeoff point when the battery runs low or the aircraft is out of sight; After GPS positioning is established, you can switch to GPS mode at any time using the 3D Acrobatic Mode to recover the aircraft. Additionally, the Airwolf features a remote-controlled landing gear function to enhance the model’s realism.2. The Airwolf helicopter has the coordinated turning function enabled by default. When turning using the directional stick (the left stick for US-style control), the flight controller automatically adjusts aileron roll control based on the current flight speed, helping the helicopter turn with a tighter radius while achieving a more realistic and graceful turning attitude.3. Equipped with a 3508-class large brushless motor driven by a higher 16V voltage, it delivers greater power and higher efficiency. Paired with a 32-bit dual-processor, 16V, 60A all-metal ESC designed specifically for helicopters, it ensures the helicopter maintains ultra-fast responsiveness during intense 3D flight. Excellent constant-speed performance ensures consistent power output throughout the entire flight, preventing loss of rotation.4. The ACE Smart Simulation Helicopter uses a custom 2.4 GHz transmitter. In an environment free of interference and obstructions, it can achieve a maximum remote control transmission range of 1 km. If the transmitter signal is lost due to excessive distance, the helicopter will autonomously return to base. During the return-to-base process, you can cancel the return by toggling the return-to-base switch and manually take control of the helicopter. During takeoff and landing, the flight controller fully takes over vertical rate control; once the altitude reaches 1 meter, control switches to proportional control via the transmitter. This feature addresses the issue of the helicopter taking off too rapidly. During takeoff, control of all joysticks except the throttle stick remains unaffected. (Since the distance from the ground is estimated based on air pressure, there may be some inaccuracies in strong wind conditions.)5. Using a 4S 5000mAh battery paired with the 16V Gold Power Kit (3508 + 60A helicopter-specific metal-case ESC), efficiency is greatly improved, delivering an ultra-long flight time of over 20 minutes so you can fly to your heart’s content (the PNP version does not include a battery or remote control).6. Three sensitivity modes: The helicopter features three built-in flight sensitivity settings, which can be switched via a switch on the remote control.In “Mild” mode, the helicopter’s maximum flight speed, maximum flight angle, and response speed are all limited. This mode is ideal for beginners to become familiar with helicopter operation.In “Standard” mode, the helicopter’s maximum flight speed, maximum flight angle, and response speed are all faster than in “Mild” mode. This mode is well-suited for everyday helicopter flight.In Sport Mode, the helicopter’s maximum flight speed, maximum flight angle, and response speed all reach the flight controller’s maximum limits. In this mode, the helicopter is extremely agile and flies very fast; it is recommended for experienced pilots to use in open areas. Product Materials: Metal + Electronic ComponentsFuselage Length (excluding rotors): 920 mmFuselage Height: 320 mmFuselage Width: 240 mmColor: As shown in the imageWeight (excluding battery): 1240 gMain Rotor Diameter (Wingspan): 820 mmMain Rotor Length (per blade): 370 mmTail Rotor Diameter (Wingspan): 125 mmTail Drive Motor: 2008 Brushless MotorMain Motor: 3508 Brushless MotorESC: 60A dual brushless ESC Flight Modes: GPS Stabilization Mode, Attitude Mode, One-Button Return-to-Home, Low Battery Return-to-Home, Loss-of-Control Return-to-Home. The helicopter is equipped with a multi-link GNSS system supporting multiple positioning systems such as GPS, BeiDou, GLONASS, and Galileo. It can hover stably outdoors in windless conditions, with a maximum flight time of approximately 25 minutes. Note: RC helicopters are high-risk products. When flying, be sure to stay away from crowds. Improper assembly, unfamiliarity with operation, damaged components, faulty electronic control equipment, and lack of familiarity with controls may all lead to unpredictable accidents such as loss of control or injury. Pilots must pay close attention to flight safety and understand that they are solely responsible for any accidents caused by their own negligence. Before each flight, carefully inspect the horizontal shaft screws on the main rotor mount, the tail rotor mount screws, and all ball joints and screws on the fuselage. Ensure they are secured with adhesive before taking off. Package Contents:Helicopter fuselage (pre-assembled) *1Handcrafted, painted one-piece fuselage *1