Enerdrive B-TEC Gen2 LiFePO4 Leisure Battery - 12V 200Ah

Specifications : Nominal Voltage: 12.8V Nominal Capacity: 200Ah Cycle Life (DOD – 80% under controlled conditions): ≥ 2000 Cycles Battery Charge Temperature: 0 ̴ 45°C Normal Charge Voltage (CV/CC): 14.20 ̴ 14.60V Standby (Float) Voltage: 13.50 ̴ 13.80V Maximum Charge Current: 150A @ 25°C for 30 mins Recommended Charge Current for Maximum Life: 40A–100A Battery Discharge Temperature: -20 ̴ 60°C Battery Output Voltage Range: 11.00 ̴ 14.60V Maximum Discharge Current: 200A @ 25°C ±5°C for 30 mins Pulse Discharge Current: 450A for 1.0s Discharge Cut-off Voltage: ≤11.20V Circuit Protection:The battery is equipped with a LiFePO₄ Battery Management System (BMS) that monitors and optimizes each prismatic cell during charge and discharge. It protects against overcharge, over-discharge, and short circuit, ensuring safe and accurate operation. Over-charge Protection Per Cell: 3.90V ± 0.03V Over-charge Release Per Cell: 3.60V ± 0.05V Over-charge Release Method: Discharge below release voltage Over-discharge Protection Per Cell: 2.80V ± 0.05V Over-discharge Release Per Cell: 3.20V ± 0.05V Over-discharge Release Method: Apply charge/voltage ≥12.8V Discharge Over Current: 220A for 30s – 250A for 3s Protection Reset Time: 5s Auto Release Over Current Release Method: Disconnect load Battery Discharge Over Temperature: • Protection at 65°C ± 5°C• Release at 50°C ± 5°C Battery Charge Over Temperature:• Protection at 55°C ± 5°C• Release at 45°C ± 5°C Short Circuit Protection: Auto release after 5s Dimensions: • Length: 505 mm• Width: 172.5 mm• Height: 265 mm Weight: Approx. 25 kg Case Construction: Hi-Impact ABS Plastic Temperature & Humidity Range: • ≤ 30 days: -20°C ̴ 60°C, 5 ̴ 75% RH• ≥ 30 days: -10°C ̴ 45°C, 5 ̴ 75% RH Self-discharge Rate: ≤ 3% per month Warranty: 5 years Note: For maximum performance and lifespan of your B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery’s BMS The 200Ah battery is able to accept a maximum inverter capacity of 2600W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery. This product is designed for internal use ONLY. With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. 📦 Pickup & Delivery Pick up only 🧰 Installation & Battery Registry Services Professional installation and battery registration is available in store - please contact us for pricing.