Connect T1 Bluetooth Transmitter for TV

The Connect T1 Bluetooth Transmitter for TV features digital and analog audio inputs, dual headphone or speaker connectivity, and Qualcomm aptX technology for high fidelity, low latency audio.IncludesOne (1) Connect T1 Bluetooth TransmitterOne (1) Micro-USB charging cableOne (1) 3.5 mm audio cableOne (1) 3.5 mm to RCA audio cableOne (1) Digital Optical SPDIF audio cableUser manualFeaturesDesigned to enable TVs and other devices to stream full-range, crystal clear digital sound wirelessly to up to two Bluetooth headphones or speakers for the ultimate music and movie experienceHigh fidelity wireless audioEquipped with Bluetooth version 4.0 and aptX Low Latency technologyDual-headphone streaming—pairs with up to two headphones or speakers simultaneouslySupports 3.5 mm headphone jack, RCA, or TOSLINK digital optical (SPDIF) audio connectionsEasy setup and travel-friendly designOperating range of up to 30 ft (10 m)Compatible with both new and old TVsBuilt-in rechargeable battery provides up to 12 hours of playtimeFully charges in approx. 1.5 hoursMeasures 2.2” x 2.2” x 1”Weighs 1.1 oz*Headphones not includedHow to UseAll necessary cables are included for easy plug and play. Refer to user manual for best setup practicesTo turn the Connect T1 on/off, toggle the power switchThe Connect T1 has a built-in rechargeable battery, so it’s possible to operate the unit without being plugged into a power source. To avoid recharging, it is recommended to keep the unit plugged into a wall outletTo enter Bluetooth pairing mode, press the “A” button once. A solid blue light indicates a device has been pairedTo pair a second device, press the “B” button once. A solid blue light indicates a device has been pairedSet your TV audio output setting to PCM for optical compatibilityUse aptX Low Latency-enabled headphones for best resultsCare InstructionsTaking care of your device in accordance with the following recommendations will ensure optimal performance and a long lifespanBattery performance will be severely decreased when stored in extreme temperatures: below -10° C/14° F or above 45° C/113° F including direct sunlightClean with a soft, slightly damp cloth. Do not use chemical cleanersThere are no user replaceable/reparable parts in the transmitterDisassembling it will void your warrantyDo not expose to liquids. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warrantyDo not use around flammable gasses as fire or explosion may occur