Connect T1 Transmitter & Matrix Cinema Headphones Bundle

The Connect Bluetooth wireless TV headphone system includes the Connect T1 Transmitter and Matrix Cinema Wireless Headphones, letting you listen to your TV with crystal-clear wireless digital sound without bothering those around you.IncludesOne (1) Connect T1 Bluetooth TransmitterOne (1) pair of Matrix Cinema Bluetooth Wireless HeadphonesTwo (2) Micro-USB charging cablesOne (1) 3.5 mm audio cableOne (1) 3.5 mm to RCA audio cableOne (1) Digital Optical SPDIF audio cableUser manualFeaturesConnect T1 Bluetooth Transmitter:Designed to enable TVs and other devices to stream full-range, crystal clear digital sound wirelessly to up to two Bluetooth headphones or speakers for the ultimate music and movie experienceHigh fidelity wireless audioEquipped with Bluetooth version 4.0 and aptX Low Latency technologyDual-headphone streaming—pairs with up to two headphones or speakers simultaneouslySupports 3.5 mm headphone jack, RCA, or TOSLINK digital optical (SPDIF) audio connectionsEasy setup and travel-friendly designOperating range of up to 30 ft (10 m)Compatible with both new and old TVsBuilt-in rechargeable battery provides up to 12 hours of playtimeFully charges in approx. 1.5 hoursMeasures 2.2” x 2.2” x 1”Weighs 1.1 ozMatrix Cinema Bluetooth Wireless Headphones:Designed with CinemaEAR, an advanced audio enhancement feature, that lets you switch between four different sound modes:Clear Voice Mode: Boosts speech clarity to make dialogue in movies and TV programs easier to hear over background soundsClear Voice Plus Mode: Additional enhancement to provide a greater boost in speech clarity and intelligibilityDynamic Music Mode: Improves bass and treble response to make music sound more lively and excitingBass Boost Mode: Enhances bass response and depth to create more impact and immersion with movies and musicCinemaEAR works with all Bluetooth devices to improve audio in movies, TV programs, sportscasts, audiobooks, and musicHigh-resolution 40 mm drivers deliver clear speech and dynamic bassQualcomm® aptX™ Low Latency codec minimizes wireless audio delay, improving lip-syncing in movies and TV shows with compatible devicesLightweight construction and over-ear fit provide all-day comfort while ultra-soft memory foam pads reduce outside noise and keep others from hearing your mediaIntegrated microphone and controls let you take calls and control music playback with phones and tabletsOperating range of up to 30 ft (10 m)Compatible with Bluetooth audio devices such as a Bluetooth transmitter, phone, laptop, or tabletUltra-efficient Bluetooth 5.0 chipset provides up to 30 hours of talk time and 28 hours of media playbackFully charges in approx. 2 hoursMeasures 8” x 6.5” x 2”Weighs 7.9 ozHow to UseHeadphones and Transmitter come paired, ready to use right out of the boxAll necessary cables are included for easy plug and play. Refer to user manual for best setup practicesConnect T1 Bluetooth Transmitter:To turn the Connect T1 on/off, toggle the power switchThe Connect T1 has a built-in rechargeable battery, so it’s possible to operate the unit without being plugged into a power source. To avoid recharging, it is recommended to keep the unit plugged into a wall outletTo enter Bluetooth pairing mode, press the “A” button once. A solid blue light indicates a device has been pairedTo pair a second device, press the “B” button once. A solid blue light indicates a device has been pairedSet your TV audio output setting to PCM for optical compatibilityUse aptX Low Latency-enabled headphones for best resultsMatrix Cinema Bluetooth Wireless Headphones:Matrix Cinema comes pre-paired to the Connect T1To turn headphones on/off, toggle the power switchTo manually enter Bluetooth pairing mode, press and hold the “M” button for 3 seconds or until an alternating red and blue flashing light pattern appearsPair to your phone, tablet, or other Bluetooth device. Device name: “MEE audio Matrix Cinema”To use Matrix Cinema headphones without Bluetooth, plug the provided 3.5 mm stereo cable into the headphones and into an audio source, such as a laptop, phone, or tabletTo play/pause music playback, tap the “M” multifunction button onceTo answer/hang up phone calls, tap the “M” multifunction button onceTo reject an incoming call, press and hold the “M” multifunction button for 2 secondsTo decrease volume, tap the (-) button each time. To increase the volume, tap the (+) buttonTo skip to previous track, press and hold the (-) button for 2 seconds. To skip to next track, press and hold the (+) button for 2 secondsCare InstructionsConnect T1 Bluetooth Transmitter:Taking care of your device in accordance with the following recommendations will ensure optimal performance and a long lifespanBattery performance will be severely decreased when stored in extreme temperatures: below -10° C/14° F or above 45° C/113° F including direct sunlightClean with a soft, slightly damp cloth. Do not use chemical cleanersThere are no user replaceable/reparable parts in the transmitterDisassembling it will void your warrantyDo not expose to liquids. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warrantyDo not use around flammable gasses as fire or explosion may occurMatrix Cinema Bluetooth Wireless Headphones:Clean with a soft cloth, damp with diluted soap water solution if necessary. Do not use chemical cleanersBattery performance will be severely decreased when stored in extreme temperatures: below -10° C/14° F or above 45° C/113° F including direct sunlightThe lifetime of the battery will be significantly reduced if your headset is not charged for a long time. It is recommended to charge your headset at least once a monthThere are no user replaceable/reparable parts in the headset. Disassembling it will void your warrantyIf the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warrantyDo not use around flammable gasses as fire or explosion may occur