Non-Abrasive Grip Kit (26-Pieces)

Getting a grip on the little things in life has always been easier said than done—until now. Introducing the Grip Kit, 26 individual, pre-cut grips designed to give you an extra layer of grip on the small things you pick up every day, including wireless earbuds, contact lens cases, pill bottles, phone chargers, outdoor sporting gear, hearing aids, and so much more. Just peel, stick, and get a grip.IncludesTwenty-six (26) pre-cut, adhesive grip strips in seven (7) sizes:Six (6) 25 mm x 5 mm stripsFour (4) 50 mm x 7.5 mm stripsFour (4) 25 mm x 25 mm stripsFour (4) 50 mm x 12.5 mm stripsFour (4) 100 mm x 12.5 mm stripsTwo (2) 50 mm x 25 mm stripsTwo (2) 50 mm x 50 mm stripsFeaturesDesigned to add extra grip, safety, and stability to almost any surfaceMade to adhere to any slippery surface without interfering with wireless chargers or magnetic mountsNon-abrasive material won’t leave behind any sticky residue or scratch your furniture, floor, or carWaterproof—great for applying to outdoor items, or securing racks in your bathtub or shower100% allergy-free, made to not irritate your skin when you touch itEco-friendly and recyclableMade with HDPE plastic, a lightweight, flexible, strong, high-density polyethylene plastic whose grip is superior to rubber and latexHow to UseHow to apply:Step 1: Prepare the surfaceClean the area where you will apply the grip stripUse a mild cleaner or rubbing alcohol to remove dirt, oils, or residuesAllow the surface to dry completely before applicationTip: A clean, dry surface ensures the best adhesionStep 2: Measure and cut (if needed)Strip can be cut to size with standard scissors or a utility knifeMeasure the space where you want to apply it and cut accordinglyRound the corners slightly if you want extra durability (sharp corners can lift more easily over time)Step 3: PeelCarefully peel off the backing from the adhesive sideAvoid touching the sticky side too much to maintain strong adhesionStep 4: StickPlace the adhesive side onto your desired surfacePress firmly, smoothing out any air bubblesApply even pressure across the entire strip to ensure a secure bondStep 5: Cure (optional for best results)If possible, allow the strip to set undisturbed for several hours to maximize adhesion strengthLight pressure (like a book or heavy object) can help it bond even more securelyHow to remove:While these grip strips are designed to stick securely, they can be removed when needed with minimal effortStep 1: Start at a cornerUse your fingernail or a plastic scraper (like a credit card) to gently lift one corner of the materialTip: Avoid using sharp tools like metal blades, which could damage the underlying surfaceStep 2: Peel slowlyOnce you have a corner lifted, slowly peel the strip back at a low angle (close to the surface)Peel steadily to minimize any adhesive residue being left behindStep 3: Remove adhesive residue (if any)If a small amount of adhesive remains, use a soft cloth and gentle adhesive remover or rubbing alcoholLightly rub the area until the residue is goneWipe clean with water and dry the surface afterwardStep 4: Clean and restore surfaceAfter removal and cleaning, your surface should be back to normal with no damageIf you're applying a new strip, make sure the surface is fully clean and dry before reapplying