nutribullet Juicer

Compact, efficient, and easy to operate, the nutribullet Juicer® is designed to minimize prep time and mess while maximizing yield, creating delicious, nourishing juices without skipping a beat. This 800-watt juicer is built for simplicity and performance, featuring streamlined speed control and a 3” wide feed chute that easily accommodates whole fruits and vegetables. With a straightforward, snap-together design, assembly and cleanup are a breeze—leaving you more time to sip, savor, and squeeze the most out of your day.IncludesOne (1) motor baseOne (1) pulp basin with 3” feed chute, 1.5 LOne (1) stainless steel sieveOne (1) juice pitcher, 27 ozOne (1) sealing pitcher lid with froth separatorOne (1) food pusherOne (1) cleaning brushRecipe bookUser guideFeaturesPowerful 800-watt motor works to get the most out of every ingredient3” wide feed chute fits certain fruits and vegetables whole, helping cut down on chopping, peeling, and other prepErgonomic control dial allows you to toggle between two speeds to maximize yield from hard and soft ingredients alikeFlexible spout can be rotated upwards between juicing sessions to prevent drips and spills, and detached afterwards for easy cleaning27 oz juice pitcher has a tight-sealing lid that fits snugly underneath the juicer spout, a detachable froth separator that keeps your juice smooth, and an easy-pour spoutMeasures 17.95” x 11.02” x 10.47”Weighs 6.9 lbsHow to UseGather all of your desired ingredients and wash them. Prepare the ingredients to be juiced by cutting, skinning, or removing the rind, stems, or stone seedsAfter the juicer is fully assembled, plug the power cord into an outlet. Use the Dual-Speed Control Dial to select a speed to begin juicing. You can toggle between speeds as desired depending on the type of produceWhile the motor is running, begin gently guiding your ingredients into the feed chute using the food pusherNote: Do not use excess force or speed when pushing food down with the food pusher, as it will not allow for maximum juice yieldWarning: Never use hands/ fingers or other tools to push food down the feed chute into the sieve. Only the food pusher should be used to push down ingredientsJuice will begin to flow out of the spout and into the juice pitcher, while the pulp will be separated and stored in the pulp basinWhen the pulp basin is completely full, it must be emptied before you continue juicing. See disassembly instructionsAlways be sure to turn the Dual-Speed Control Dial to the “OFF” position and wait for the sieve to stop spinning before removing the juice pitcher from under the spout. Unplug the unit after each useRemove the juice pitcher from under the spout. You may close the juice pitcher lid and store juice in the juice pitcher if desiredNote: To do this, you’ll first need to tip the juice pitcher forward at a slight angle, so the lid’s large hole has some separation from the spout, then you can slide out the pitcher. This is the reverse of what you did during assemblyImmediately move the no-drip spout cover downward over the spout to avoid any residual drips onto the unit or onto the surface below the juicerTip: It’s recommended to use your left hand to pull the juice pitcher away, while using your right hand to swing the no-drip spout cover down and over the spout openingCare InstructionsAlways ensure the motor base is unplugged before you begin assembly, disassembly, cleaning, or storage of the unitOnce the pulp basin is emptied, rinse all parts under running waterUse the cleaning brush to scrub the sieve under running water. Be sure to properly clean the sieve every time you juice. Leftover traces of fruits and vegetables can cause buildup in the sieve, which can clog the holes and may prohibit maximum juice extractionWarning: Always use precaution when cleaning the sieve, as it contains sharp blade teeth on the flat disc partTip: Always clean the sieve as soon as possible after juicing using the cleaning brush. If allowed to sit, pulp will dry on the sieve and it will become more difficult to scrub blocked holes. If this happens, be sure to allow the sieve to soak in hot water for 30 minutesAll of the components except the food pusher and motor base are dishwasher safe. You may also hand wash with warm, soapy waterTip: Do not use the Sterilize cycle on your dishwasher to clean your juicer as it may cause parts to deformWipe down the motor base with a clean, damp clothWarning: Never submerge motor base into water or other liquidStorage:Store the juice pitcher upright with the pitcher lid secured on top. Do not place anything on top of the pitcher lidStore remaining pieces in a safe place where they will not be damaged and won’t cause harm, as some of the pieces are sharp!