High Glossy Breeze Blue Color PPF (Paint Protection Film)

Features TPU Paint Protection: Combines a fresh blue color transformation with protection against everyday road wear and paint damage. Hydrophilic Properties: Water and dirt slide off the surface. No streaks. No stains. Heat-Activated Self-Healing Topcoat: Repairs scratches and swirl marks with a heat gun, hot water, or direct sunlight. Durable, Scratch and Stain Resistance: Resists scratches, stains, yellowing, and cracking, helping protect against road debris and chemical spills. High-Gloss Blue Finish: Delivers a smooth, glossy appearance with superior clarity and no orange peel effect. Easy Dry Installation: Air-release channels allow installation without slip solution or bubbles. Specifications Product Type: TPU Color Paint Protection Film (PPF) Application Method: Dry Application. Color: Breeze Blue. Finish: High Glossy. Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, 49ft and 59ft. Packaging: Roll. Things You Should Know Best Paint Protection Film (PPF) How To Apply Paint Protection Film PPF Vs Vinyl Wrap How Long Does Paint Protection Film Last? How Much Does Paint Protection Film Cost? Video Structure Functions Recommended Uses ▲ Standard Size & Appearance Classification Unit Specs Remarks Thickness Top protected film um 50±5% PET Self-healing Layer um 10±5% / Face Film um 60±3 Thermoplastic Polyurethane Color Layer μm 17±0.5 / Base Color Layer μm 70±0.5 Termoplastic Polyurethane Acrylic Adhesive um 35±2 Solvent-based Release liner um 75±5% Satin Semi-transparent White Width m 1.52±1% 4.98ft Length m 15±1% 49.21ft Physical properties ▲ General Properties Features Test Method/Conditions Data Gloss（60°） GB 8807 ≥90 Water Contact Angle DL/T864 Appendix A ≥90° Hardness GB/T 6739 ≥85A Elongation at Break GB/ T1040 ≥350% Coating Elongation at Break GB/ T1040 ≥85% Tensile Strength GB/ T1040 ≥18 (mpa) Initial Adhesion FTM 9 ≥ 8N/25mm 24h 180° Peel Force GB/T 2792 ≥ 12N/25mm Storage Aging Peel Force GB/T 2792 ≥ 10N/25mm Application Aging Peel Force GB/T 2792 ≥ 16N/25mm Peel Force GB/T 2792 ≤ 0.3N/25mm Dimensional Stability (MD) FTM 14 ≤ 0.5mm Dimensional Stability (CD) FTM 14 ≤ 0.4mm Scratch Repair (0.1mm) Copper brush&Heat gun Repair Time≤ 3minutes Stain Resistance GB/T 16422.2 No visible water stain deposits Hydrolysis Resistance QC/T 1171-2021 stable for over 200h Acid & Alkali Resistance Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h No visual coating defects Yellowing ΔE QUV Method 2000h ≤2 Application Termperature / +20℃ to +30℃ ServiceTemperature / -50℃ to +110℃ Recommended Shelf Life 15-25°C or 59-77° F and 45-50% Humidity 2 years Warranty Period / 3-5 years Warranty & Installation Guidelines Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose). Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price. Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles. Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution. Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond. Recommendations Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquidApplication method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.Aftercare: PH neutral. Avoid wax or solvents. Durability: The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased. CAUTION! 1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. 2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch. 3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.