Red Forged Carbon Fiber Vinyl Wrap

Red forged carbon fiber vinyl wrap puts color directly into the compression-molded fiber pattern, not over it. The red sits inside the random fiber arrangement alongside black, so the two tones shift against each other as the viewing angle changes. Metallic flakes embedded in the pattern add a third layer of movement, picking up light independently from the fiber texture itself. The result looks different on a flat hood at noon than it does on a curved quarter panel in low light. This is one of the few forged carbon colorways where the color is structural rather than a surface treatment. Most colored carbon fiber wraps apply a tint or color coat on top of a standard pattern. Here the red is part of the fiber mix, which means it holds its depth across the full surface rather than fading toward the edges or looking flat under diffuse light. The film stretches up to 30% and conforms to mirrors, pillars, bumper inserts, and roof sections without thinning at edges. The solvent-based acrylic adhesive with air-release liner lets you reposition before final press, which matters on curved panels where the color interaction in this film reads best. Smaller accent panels show the red and black fiber shift more clearly than a flat full-panel application. Features And Specifications: Pattern: Forged carbon fiber red and black fiber bundles with embedded metallic flakes, no repeating grid, random orientation across the full surface. Color: Red forged dual-tone red and black with metallic depth, not a surface tint. Durability: Rated for 2 years on exterior vertical surfaces. Weatherproof: Resists moisture, humidity, and prolonged water exposure without lifting or bubbling. Protective: Guards against surface corrosion, minor abrasions, and everyday staining. Temperature range: Stable from -50°C to 110°C (-58°F to 230°F) in service. Stretch: Up to 30% conforms to mirrors, pillars, bumper inserts, and curved interior surfaces without thinning. Adhesive: Solvent-based acrylic bonds firmly, repositions clean before final press, and removes without leaving residue. Installation: Air-release channel liner lets you adjust positioning before committing, reducing waste on complex panels. Video Structure Material Premium Polymeric Calendared Vinyl Film for long-lasting quality Vibrant, Trendy Colors to enhance your style Air Release Channel for a smooth, flawless finish Bubble-Free Application for easy, perfect installation Medium Stretchable The Maximum is 30 % Functions Standard Size & Appearance Classification Unit Spec Remark Thickness Top protected film um 36±2% PET Surface materials um 120±2% High-grade PVC-Polymeric Glue um 30±2% High-quality Solvent-based Release liner um 180±2 (paper) － Surface － Opaque － Width mm 1520±0. 01% 5ft Length mm 1800±1% 59ft Physical properties ▲ General Properties Features Test Method Results Release forceN/25mm Temperature 25℃ and Humidity 50% 0.23 Initial tackg/25mm under 26℃ and 64%, GB31125-2014 850 Peel StrengthN/25mm 25℃and 42%, GB/T2792-1998 7.51 Holding power(h) 25℃ and 50%, GB/T4851-1998 120 Shelf life stored in +15°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years Application temperature / +20℃ to +30℃ Service temperature / -50℃ to +110℃ Time limits Must use it within 3 months after receiving the wrap film 3 months Durability Vertical exposure (Black) 3 years Durability Vertical exposure (Colors) 2 years Aging Test 1 7 days under 65°C No adhesive residue with heat Aging Test 2 10 days under 65°C No adhesive residue without heat Shrinkage / less than 4% Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquidApplication method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlapsAftercare: PH neutral, Avoid wax or solvents CAUTION! 1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. 2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch. 3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.