2" Tri Clamp Agitator 0.25kw 110v / 220v 1PH

  This agitator is equipped with a 2-inch tri clamp ferrule end, allowing easy installation on any pot or tank with a compatible 2-inch tri clamp ferrule. It’s perfect for stirring washes containing grains or fruits to enhance heating efficiency and prevent scorching. It’s also well-suited for applications in dairy, chemical, and fluid processing industries where effective mixing is essential. Furthermore, the agitator includes a shaft seal designed to prevent vapor leakage when used in closed heating boilers or tanks.Specifications：Power: 250wMixing speed: 1-100 rpm adjustable(If the agitator needs to run for an extended period of time please set the speed higher than 50RPM, the agitator will get hot when running slow)Connection: 2 inch Tri Clamp(Ferrule OD 64mm)Reted Pressure: -0.05 - 0.1 MPaLength of the shaft(from the ferrule to the end of the shaft): Approx 445mm / 17.5 inchesShaft diameter: 0.7 inch/18mmDiameter of the impeller: 7.6 inchIncludes:1* 0.25kw agitator with shaft and paddle1* Speed controller(to turn the agitator on/off and adjust speed)Important note: Please set the speed of the agitator to be higher than 50 RPM if you want to run it for an extended time say hours per run. The cooling fan on the motor runs slower when the motor runs at low speed and this may cause overheat and damage the motor. The length of the shaft can be extended with extensions, please send us a message if you need longer shafts.