Barrettine Log Cabin and Complete Decking Treatment - Clear - 5 Litre

Overview Barrettine Log Cabin and Complete Decking Treatment has been specifically formulated to oil and protect cabins, decking boards, deck tiles, and balustrades made from pre-treated, pressure treated or preservative impregnated timbers. This decking treatment will also give a superior finish to sheds, fences and huts. Not recommended for use over timber that has been previously coated with paints, varnishes or conventional wood stains Contains surface biocide to help stop surface mould and algae Regular treatment gives excellent water repellancy to stop splitting and cracking Resists flaking and peeling Contains UV stabilisers Harmless to beneficial insects and pets when dry Can be used on other wooden garden surfaces Area Exterior Recommended Use External log cabins, decking areas, decking tiles, sheds Base Oil-Based Coverage up to 8m² per litre Drying Time 48 - 72 Hours under dry conditions Re-Coat Time 12-24 Hours Recommended Coats 1-2 Coats VOC Levels High PreparationMake sure that the wood is dry, clean and free from repellent coatings such as paint or varnish. Sand down to remove any repellent coatings. Highly resinous timbers and some hardwoods may affect final results and performance, so test before use. Do not apply if the ambient temperature is under 5 Celsius, in damp conditions or when rain is likely within 24 hours of application. ApplicationAlways follow the manufacturer's instructions found on the tin. Test on an inconspicuous area to ensure you are happy with the finished results. Keep upright at all times and shake / stir well before and during application. Decant into paint kettle and apply an even coat of Barrettine Log Cabin and Complete Decking Treatment to all external surfaces to ensure optimum performance. For best results, apply to all external sides of log cabins and decking before construction, brushing in the direction of the wood grain. Usually, one coat applied generously with a wide bristle brush is enough, however if you require a second coat, apply it after 12-24 hours. Barrettine Log Cabin & Decking Treatment may be applied by synthetic roller or sprayer, however always back brush to ensure even coverage. Decking boards - leave for 24-48 hours or until dry before subjecting to heavy footfall traffic. Recoat as and when needed.