Dual ESP32 Wi-Fi Development Board designed by AWOK FEATURES This board has 2 ESP32-WROOM chips on it. GPS can be toggled on and off for both ESP32 chips via the dip switches located on the back of the board. The GPS can be ran simultaneously to both chips (by default all switches will be flipped to the on position) This board is intended to monitor your network and should not be used to transmit. This Development board does not include firmware, the intention of this device is to provide you with hardware to program and develop your own firmware. There are many different firmware's that an ESP32 can run and are available online so please research which one suits your needs the best. One ESP32 controls the screen, the other can be used via CLI or via the GPIO pins WHATS INCLUDED 1x Dual Mini V3 PCB 1x Case (Clear) with option SMA antenna mount hole 2x External 2.4ghz antenna 1x INTERNAL ceramic GPS antenna *NOT EXTERNAL WHATS NOT INCLUDED External GPS antenna Firmware UPDATES STL files for printing your own case can be found here. DISCLAIMER The hardware purchased from this site is for educational and experimental purposes only and is not meant for any illegal activity or purposes. I do not condone illegal activity and strongly encourage keeping usage to legal or valid educational and experimental uses allowed by law on your own equipment and or equipment you have permission to experiment on. Please check your local State and or Country laws before using any products purchased from AWOK Dynamics. Thank you.