EdgeHugger™ Clamp Kit - Ultra-Low Profile CNC T-Track Workholding System

<h2 data-start="366" data-end="405">Low Profile. Small Footprint. Strong Holding. Reduced Clamp Collision Risk.</h2> <p data-start="407" data-end="597">The <strong data-start="411" data-end="436">EdgeHugger™ Clamp Kit</strong> is a precision-engineered CNC workholding system designed to hold material rock-solid from the edge while staying almost completely out of the cutting envelope.</p> <p data-start="599" data-end="873">Unlike bulky top-down clamps that steal cutting area and force compromised toolpaths, EdgeHugger™ clamps sit just <strong data-start="713" data-end="741">0.22″ above the material</strong> and intrude only <strong data-start="759" data-end="782">0.23″ from the edge</strong>. That means cleaner toolpaths, fewer collisions, and significantly more usable spoilboard.</p> <p data-start="875" data-end="1146">Purpose-built for CNC routers using T-track systems, the EdgeHugger™ Clamp Kit is engineered to perform under real cutting forces, not bench tests. Every component is <strong data-start="1041" data-end="1058">100% USA made</strong>, using premium materials designed for repeatability, safety, and long-term reliability.</p> <hr data-start="1148" data-end="1151"> <h2 data-start="1153" data-end="1184">Why EdgeHugger™ Is Different</h2> <h3 data-start="1186" data-end="1207">Ultra-Low Profile</h3> <p data-start="1208" data-end="1350">Only <strong data-start="1213" data-end="1242">0.22″ above the workpiece</strong>, dramatically reducing the risk of bit or spindle collisions and allowing safer, more aggressive toolpaths.</p> <h3 data-start="1352" data-end="1378">Minimal Edge Intrusion</h3> <p data-start="1379" data-end="1510">Clamps extend just <strong data-start="1398" data-end="1425">0.23″ into the material</strong>, preserving valuable cutting area near edges and maximizing usable spoilboard space.</p> <h3 data-start="1512" data-end="1535">Wide Clamping Range</h3> <p data-start="1536" data-end="1781">The EdgeHugger™ clamping system accommodates material thicknesses from <strong data-start="1607" data-end="1644">3/16″ (5 mm) up to 1-1/2″ (38 mm)</strong> using the included stainless steel M6 flat-head screw set—covering thin sheet goods through thick stock without changing clamp hardware.</p> <h3 data-start="1783" data-end="1809">Serious Clamping Force</h3> <p data-start="1810" data-end="1965">Rated at <strong data-start="1819" data-end="1844">1000 PSI working load</strong> with a <strong data-start="1852" data-end="1872">4× safety factor</strong> (tested to <strong data-start="1884" data-end="1896">4000 PSI</strong>), delivering rock-solid holding power under real CNC cutting forces.</p> <h3 data-start="1967" data-end="1995">Engineered for CNC Loads</h3> <p data-start="1996" data-end="2153">Injection-molded from <strong data-start="2018" data-end="2071">engineering-grade, fiber-reinforced thermoplastic</strong> designed to evenly distribute stress under vibration and dynamic machining loads.</p> <h3 data-start="2155" data-end="2190">Universal T-Track Compatibility</h3> <p data-start="2191" data-end="2339">Includes <strong data-start="2200" data-end="2226">universal brass T-nuts</strong> compatible with T-track systems that accept <strong data-start="2271" data-end="2297">1/4″ or 5/16″ hardware</strong>, fitting the vast majority of CNC tables.</p> <hr data-start="2341" data-end="2344"> <h2 data-start="2346" data-end="2393">What’s Included in the EdgeHugger™ Clamp Kit</h2> <p data-start="2395" data-end="2473">Each kit includes everything needed for flexible, low-profile CNC workholding:</p> <ul data-start="2475" data-end="2739"> <li data-start="2475" data-end="2502"> <p data-start="2477" data-end="2502"><strong data-start="2477" data-end="2502">4× EdgeHugger™ clamps</strong></p> </li> <li data-start="2503" data-end="2534"> <p data-start="2505" data-end="2534"><strong data-start="2505" data-end="2534">4× universal brass T-nuts</strong></p> </li> <li data-start="2535" data-end="2717"> <p data-start="2537" data-end="2611"><strong data-start="2537" data-end="2584">36× stainless steel flat-head screws (M6×1)</strong><br data-start="2584" data-end="2587"><em data-start="2589" data-end="2609">(4 of each length)</em></p> <ul data-start="2614" data-end="2717"> <li data-start="2614" data-end="2623"> <p data-start="2616" data-end="2623">20 mm</p> </li> <li data-start="2626" data-end="2635"> <p data-start="2628" data-end="2635">25 mm</p> </li> <li data-start="2638" data-end="2647"> <p data-start="2640" data-end="2647">30 mm</p> </li> <li data-start="2650" data-end="2659"> <p data-start="2652" data-end="2659">35 mm</p> </li> <li data-start="2662" data-end="2671"> <p data-start="2664" data-end="2671">40 mm</p> </li> <li data-start="2674" data-end="2683"> <p data-start="2676" data-end="2683">45 mm</p> </li> <li data-start="2686" data-end="2695"> <p data-start="2688" data-end="2695">50 mm</p> </li> <li data-start="2698" data-end="2707"> <p data-start="2700" data-end="2707">55 mm</p> </li> <li data-start="2710" data-end="2717"> <p data-start="2712" data-end="2717">60 mm</p> </li> </ul> </li> <li data-start="2718" data-end="2739"> <p data-start="2720" data-end="2739"><strong data-start="2720" data-end="2739">4 mm hex driver</strong></p> </li> </ul> <p data-start="2741" data-end="2872">All screws are <strong data-start="2756" data-end="2790">stainless steel M6×1 flat-head</strong> to maintain a true low-profile setup across a wide range of material thicknesses.</p> <hr data-start="2874" data-end="2877"> <h2 data-start="2879" data-end="2915">Clamp Dimensions &amp; Specifications</h2> <ul data-start="2917" data-end="3437"> <li data-start="2917" data-end="2943"> <p data-start="2919" data-end="2943"><strong data-start="2919" data-end="2935">Clamp width:</strong> 1.00″</p> </li> <li data-start="2944" data-end="2970"> <p data-start="2946" data-end="2970"><strong data-start="2946" data-end="2962">Clamp depth:</strong> 0.72″</p> </li> <li data-start="2971" data-end="3001"> <p data-start="2973" data-end="3001"><strong data-start="2973" data-end="2993">Clamp thickness:</strong> 0.45″</p> </li> <li data-start="3002" data-end="3051"> <p data-start="3004" data-end="3051"><strong data-start="3004" data-end="3025">Clamping surface:</strong> 1.00″ wide × 0.23″ deep</p> </li> <li data-start="3052" data-end="3088"> <p data-start="3054" data-end="3088"><strong data-start="3054" data-end="3080">Height above material:</strong> 0.22″</p> </li> <li data-start="3089" data-end="3118"> <p data-start="3091" data-end="3118"><strong data-start="3091" data-end="3110">Edge intrusion:</strong> 0.23″</p> </li> <li data-start="3119" data-end="3182"> <p data-start="3121" data-end="3182"><strong data-start="3121" data-end="3140">Clamping force:</strong> 1000 PSI working load (4000 PSI tested)</p> </li> <li data-start="3183" data-end="3249"> <p data-start="3185" data-end="3249"><strong data-start="3185" data-end="3204">Clamp material:</strong> Fiber-reinforced engineering thermoplastic</p> </li> <li data-start="3250" data-end="3297"> <p data-start="3252" data-end="3297"><strong data-start="3252" data-end="3278">Manufacturing process:</strong> Injection molded</p> </li> <li data-start="3298" data-end="3346"> <p data-start="3300" data-end="3346"><strong data-start="3300" data-end="3313">Hardware:</strong> Stainless steel M6×1 flat-head</p> </li> <li data-start="3347" data-end="3400"> <p data-start="3349" data-end="3400"><strong data-start="3349" data-end="3375">T-track compatibility:</strong> 1/4″ and 5/16″ systems</p> </li> <li data-start="3401" data-end="3437"> <p data-start="3403" data-end="3437"><strong data-start="3403" data-end="3428">Manufacturing origin:</strong> USA made</p> </li> </ul> <hr data-start="3439" data-end="3442"> <h2 data-start="3444" data-end="3472">Who This Clamp Kit Is For</h2> <p data-start="3474" data-end="3513">The EdgeHugger™ Clamp Kit is ideal for:</p> <ul data-start="3515" data-end="3728"> <li data-start="3515" data-end="3575"> <p data-start="3517" data-end="3575">CNC router owners who want <strong data-start="3544" data-end="3575">maximum usable cutting area</strong></p> </li> <li data-start="3576" data-end="3625"> <p data-start="3578" data-end="3625">Shops tired of <strong data-start="3593" data-end="3625">bit crashes into tall clamps</strong></p> </li> <li data-start="3626" data-end="3666"> <p data-start="3628" data-end="3666">Full-sheet and near-edge CNC machining</p> </li> <li data-start="3667" data-end="3728"> <p data-start="3669" data-end="3728">Users who value <strong data-start="3685" data-end="3728">repeatability, safety, and clean setups</strong></p> </li> </ul> <p data-start="3730" data-end="3852">If you regularly machine close to the edge of your material, this clamp system fundamentally changes how you fixture jobs.</p> <hr data-start="3854" data-end="3857"> <h2 data-start="3859" data-end="3888">Frequently Asked Questions</h2> <h3 data-start="3890" data-end="3932">Will EdgeHugger™ work with my T-track?</h3> <p data-start="3933" data-end="4095">Yes. The included universal brass T-nuts are compatible with T-track systems that accept <strong data-start="4022" data-end="4048">1/4″ or 5/16″ hardware</strong>, which covers the vast majority of CNC tables.</p> <p><em>**NOTE: The t-nuts in the current kit <strong>do not fit</strong> Next Wave track beds. These are currently in development.</em></p> <h3 data-start="4097" data-end="4157">Is the clamping force strong enough for aggressive cuts?</h3> <p data-start="4158" data-end="4317">Absolutely. EdgeHugger™ clamps are rated for a <strong data-start="4205" data-end="4230">1000 PSI working load</strong> and tested with a <strong data-start="4249" data-end="4269">4× safety factor</strong>, meaning they can withstand up to <strong data-start="4304" data-end="4316">4000 PSI</strong>.</p> <h3 data-start="4319" data-end="4362">Why use thermoplastic instead of metal?</h3> <p data-start="4363" data-end="4600">EdgeHugger™ clamps are made from <strong data-start="4396" data-end="4442">fiber-reinforced engineering thermoplastic</strong> chosen for its ability to distribute stress evenly, resist deformation, and avoid point-loading. This is structural, load-rated material—not generic plastic.</p> <h3 data-start="4602" data-end="4639">How close can I cut to the clamp?</h3> <p data-start="4640" data-end="4808">Very close. The clamp intrudes just <strong data-start="4676" data-end="4708">0.23″ from the material edge</strong>, making it ideal for profiling, pocketing, and contour cuts that are risky with traditional clamps.</p> <h3 data-start="4810" data-end="4856">Is everything in this kit made in the USA?</h3> <p data-start="4857" data-end="4948">Yes. <strong data-start="4862" data-end="4881">Every component</strong> in the EdgeHugger™ Clamp Kit is manufactured in the United States.</p> <h3 data-start="4950" data-end="4988">Can I buy replacement parts later?</h3> <p data-start="4989" data-end="5055">Yes. Replacement clamps will be available separately.</p> <hr data-start="5057" data-end="5060"> <h2 data-start="5062" data-end="5085">CNC Clamp Comparison</h2> <div class="TyagGW_tableContainer"> <div class="group TyagGW_tableWrapper flex w-fit flex-col-reverse" tabindex="-1"> <table data-start="5087" data-end="5559" class="w-fit min-w-(--thread-content-width)"> <thead data-start="5087" data-end="5137"> <tr data-start="5087" data-end="5137"> <th data-start="5087" data-end="5097" data-col-size="sm">Feature</th> <th data-start="5097" data-end="5111" data-col-size="sm">EdgeHugger™</th> <th data-start="5111" data-end="5137" data-col-size="sm">Traditional CNC Clamps</th> </tr> </thead> <tbody data-start="5178" data-end="5559"> <tr data-start="5178" data-end="5225"> <td data-start="5178" data-end="5202" data-col-size="sm">Height Above Material</td> <td data-col-size="sm" data-start="5202" data-end="5210">0.22″</td> <td data-col-size="sm" data-start="5210" data-end="5225">0.75″–1.5″+</td> </tr> <tr data-start="5226" data-end="5261"> <td data-start="5226" data-end="5243" data-col-size="sm">Edge Intrusion</td> <td data-col-size="sm" data-start="5243" data-end="5251">0.23″</td> <td data-col-size="sm" data-start="5251" data-end="5261">0.75″+</td> </tr> <tr data-start="5262" data-end="5306"> <td data-start="5262" data-end="5283" data-col-size="sm">Toolpath Clearance</td> <td data-col-size="sm" data-start="5283" data-end="5295">Excellent</td> <td data-col-size="sm" data-start="5295" data-end="5306">Limited</td> </tr> <tr data-start="5307" data-end="5352"> <td data-start="5307" data-end="5329" data-col-size="sm">Usable Cutting Area</td> <td data-col-size="sm" data-start="5329" data-end="5341">Maximized</td> <td data-col-size="sm" data-start="5341" data-end="5352">Reduced</td> </tr> <tr data-start="5353" data-end="5408"> <td data-start="5353" data-end="5370" data-col-size="sm">Clamping Force</td> <td data-col-size="sm" data-start="5370" data-end="5387">Rated &amp; tested</td> <td data-col-size="sm" data-start="5387" data-end="5408">Often unspecified</td> </tr> <tr data-start="5409" data-end="5454"> <td data-start="5409" data-end="5431" data-col-size="sm">Stress Distribution</td> <td data-col-size="sm" data-start="5431" data-end="5438">Even</td> <td data-col-size="sm" data-start="5438" data-end="5454">Point-loaded</td> </tr> <tr data-start="5455" data-end="5505"> <td data-start="5455" data-end="5472" data-col-size="sm">Bit Crash Risk</td> <td data-col-size="sm" data-start="5472" data-end="5488">Extremely low</td> <td data-col-size="sm" data-start="5488" data-end="5505">Moderate–high</td> </tr> <tr data-start="5506" data-end="5559"> <td data-start="5506" data-end="5528" data-col-size="sm">CNC-Specific Design</td> <td data-col-size="sm" data-start="5528" data-end="5534">Yes</td> <td data-col-size="sm" data-start="5534" data-end="5559">Often general-purpose</td> </tr> </tbody> </table> </div> </div> <hr data-start="5561" data-end="5564"> <h3 data-start="5601" data-end="5644">What is an edge clamp for a CNC router?</h3> <p data-start="5645" data-end="5820">An edge clamp is a CNC workholding device that secures material from the side rather than the top, allowing cutting closer to the material edge while reducing tool collisions.</p> <h3 data-start="5822" data-end="5881">Are EdgeHugger™ clamps safe for high-speed CNC routing?</h3> <p data-start="5882" data-end="6023">Yes. EdgeHugger™ clamps are designed specifically for CNC routing forces and vibration and are rated at <strong data-start="5986" data-end="6022">1000 PSI with a 4× safety factor</strong>.</p> <h3 data-start="6025" data-end="6087">What makes EdgeHugger™ different from aluminum CNC clamps?</h3> <p data-start="6088" data-end="6245">EdgeHugger™ clamps use <strong data-start="6111" data-end="6157">fiber-reinforced engineering thermoplastic</strong> to distribute load evenly, reducing point stress while maintaining high clamping force.</p> <h3 data-start="6247" data-end="6322">Will EdgeHugger™ clamps work with MDF spoilboards and aluminum T-track?</h3> <p data-start="6323" data-end="6447">Yes. The included universal brass T-nuts are compatible with aluminum T-track systems commonly installed in MDF spoilboards.</p> <h3 data-start="6449" data-end="6513">Can EdgeHugger™ clamps be used for full-sheet CNC machining?</h3> <p data-start="6514" data-end="6630">Yes. Their ultra-low profile and minimal edge intrusion make them ideal for full-sheet and near-edge CNC operations.</p> <h3 data-start="6632" data-end="6695">What screw sizes are included in the EdgeHugger™ Clamp Kit?</h3> <p data-start="6696" data-end="6797">The kit includes stainless steel <strong data-start="6729" data-end="6754">M6×1 flat-head screws</strong> ranging from <strong data-start="6768" data-end="6786">20 mm to 60 mm</strong> in length.</p> <h3 data-start="6799" data-end="6842">Are EdgeHugger™ clamps made in the USA?</h3> <p data-start="6843" data-end="6930">Yes. All components in the EdgeHugger™ Clamp Kit are manufactured in the United States.</p> <h3 data-start="6799" data-end="6842">Are EdgeHugger™ clamps compatible with my CNC Machine?</h3> <p data-start="6843" data-end="6930"><meta charset="utf-8">EdgeHugger™ clamps are compatible with most CNC machine T track systems. The <meta charset="utf-8">EdgeHugger™ clamps are not compatible with Next WaveShark CNC Machines at this time. </p> <p data-start="6843" data-end="6930">TQ-EH-KIT<br></p>